Home  Objectives  Partners  Publications
Google

WWW mecca.noc.uth.gr
Standards


 
mecca.noc.uth.gr Industry Standards  

Standards

Normative references
In the following table is a list of some of the European (EN) standards within the welding sector. This list is not complete.

Bold documents are of special importance

DokNo

Name

Year

EN 287-1

Qualification test of welders - Fusion welding - Part 1:Steels

3.
2004

EN ISO 9606-2

Qualification test of welders - Fusion welding - Part 2:Aluminium

1.
1999

EN ISO 9606-3

Qualification test of welders - Fusion welding - Part 3: Copper and copper alloys

1.
1999

EN ISO 9606-4

Qualification test of welders - Fusion welding - Part 4: Nickel and nickel alloys

1.
1999

EN ISO 9606-5

Qualification test of welders - Fusion welding - Part 5: Titanium and titanium alloys

1.
1999

EN ISO 15607

Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)

2004

EN ISO 15609-1

Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)

2004

EN ISO 15614-1

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1: 2004)

2004

EN ISO 15610

Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003)

2004

EN ISO 15611

Specification and qualification of welding procedures for metalli materials - Qualification based on previous welding experience (ISO 15611:2003)

2004

EN ISO 15612

Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)

2004

EN ISO 15613

Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)

2004

EN 288-9

Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines

1999

EN ISO 3834

Welding coordination - Tasks and responsibilities

2005

EN ISO 3834-1

Quality requirements for welding - Fusing welding of metallic materials - Part 1: Guidelines for selection and use

2005

EN ISO 3834-2

Quality requirements for welding - Fusing welding of metallic materials - Part 2: Comprehensive quality requirements

2005

EN ISO 3834-3

Quality requirements for welding - Fusion welding of metallic materials - Part 3: Standard quality requirements

2005

EN ISO 3834-4

Quality requirements for welding - Fusion welding of metallic materials - Part 4: Elementary quality requirements

2005

EN 756

Welding consumables - Solid wires, solid wireflux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification

2
2004

EN 970

Non-destructive examination of fusion welds - Visual examination

1998

EN 1011-1

Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding

1998

EN 1011-1/A1

Amendment A1 - Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding

2002

EN 1011-1/A2

Amendment A2 - Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding

2004

EN 1011-2

Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels

2001

EN 1011-2/A1

Amendment A1 - Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels

2004

NS-EN 1011-3

Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels

2000

EN 1011-3/A1

Amendment A1 - Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels

2004

EN 1011-5

Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel

2003

EN 1418

Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials

1998

EN ISO 4063

Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998)

2000

EN ISO 5817

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003)

2003

EN ISO 6520-1

Welding and allied processes - Classification of geometric
imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:1998)

1998

EN ISO 6520-2

Welding and allied processes - Classification of geometric
imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001)

2002

EN ISO 9692-1

Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2003)

2004

EN ISO 9692-2

Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998) (Corrigendum AC:1999 incorporated)

1998

EN ISO 9692-3

Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000)

2001

EN ISO 9692-3/A1

Amendment A1 - Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys

2004

EN ISO 9692-4

Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003)

2003

copyright 2005-2007 MECCA Consortium webmaster